SKY81279

1.5A Single Flash LED Driver IC in a TDFN Package


The SKY81279 is a high-efficiency, 1.5A high-current boost converter with a programmable constant current sink. It is an ideal power solution for LED photo flash applications in all single-cell Li-ion powered products.

The SKY81279 maintains output current regulation by switching the internal high-side and low-side switch transistors. The transistor switches are pulse-width modulated at a fixed frequency of 2.0MHz. The high switching frequency allows the use of a small external inductor and output capacitor.

Skyworks' proprietary AS2Cwire™ (Advanced Simple Serial Control) serial digital interface is used to enable, disable, configure, and program the operation of the SKY81279. Using the AS2Cwire interface, the LED flash and movie-mode currents can be programmed to different levels. The SKY81279 includes a separate Flash Enable input to initiate the flash operation and a Flash Inhibit pin to quickly reduce the flash current to moviemode levels during high battery demand.

The SKY81279 contains a thermal management system to protect the device in the event of output short circuit. Built-in circuitry prevents excessive inrush current during start-up. The shutdown feature reduces quiescent current to less than 1.0μA.

The SKY81279 is available in a a Pb-free, 14-pin 2mm x 3mm TDFN package.

Please note: SKY81279-11-563LF is being discontinued and is not recommended for new designs.

Specifications

Flash IOUT Total (mA)1500
Movie Mode IOUT Total (mA)143
LED Channels1
Min. VIN (V)2.7
Max. VIN (V)5.5
Max. VOUT (V)5.5
InterfaceAS2Cwire™
Max. Shutdown Current (μA)1
Typ. IQ (μA)230
Peak Efficiency88%
PackageTDFN23 14L
Package (mm)2 x 3 x 0.75
PackageTDFN23-14

Features

  • Input Voltage Range: 2.7V to 5.5V
  • Single Channel Flash Output
  • Up to 1.5A Regulated Output Current
  • Up to 88% Efficiency
  • 2.0 MHz Switching Frequency
  • Separate Flash Enable
  • Single Resistor Sets Flash and Movie Mode Current
  • AS2Cwire Single Wire Programming:
    • Flash Current Ratio
    • Movie Mode Current
    • Output Enable Control
  • True Load Disconnect
  • Soft-Start and Input Current Limit
  • Over-Voltage, Open and Shorted LED, Short-Circuit, and Over-Temperature Protection
  • -40°C to +85°C Temperature Range
  • 14-pin 2mm x 3mm TDFN package

Product Documents